0 
Products
Product Range
- Details
Five transformation modes: claw (able to grip 600g), shield, boomerang, sword (able to hang 1kg), crossbow.
Pascal’s Principle: Farthest shooting range up to 6 meters.
Universal PET bottle water tank interface: Most PET bottles on the market can be used, allowing for interchangeable water tanks.
Maker development: Loved by both adults and children, this toy is stylish and cool. Through the assembly process, it trains logical thinking and creativity, making you a true maker.
The water bottle still contains water, but there's no water coming out when you press the trigger.
Please troubleshoot in the following order：
1.Check if the water hose is tangled or folded, causing a blockage of water or air (as shown in the illustration).
2.If the water cylinder can't draw water, it means there is no proper seal. Please redo Page 16 step 1~3, Page 18 step 6~7, 1~3, inspect if the sealing valve's burr are removed properly, and if there are any objects blocking the washer (Part P3) and the water outlet cap (Part E5).
Two sides of assembled gripper are not symmetrical, or the opening and closing distance is abnormal(as shown in the illustration).
Solution:
1.Check if the linkage teeth are in the correct position, Page 10 step 5 to Page 12 step 17.
2.Check if the three-layer teeth are in the correct position, Page 8 step 16 to Page 9 step 23.
3.Check if the handle's internal teeth bars are in the correct position, Page 5 step 4 to Page 7 step 12.
The gripper cannot open or close.
Solution:
1.Ensure that the gripper locking lever is released, Page 31.
2.Ensure Part C9 is placed correctly, Page 6 step 7.step 17.
The clamps cannot be rotated upwards to the rear to form a Boomerang or Shield Mode.
Check if the tension springs (Part P8) are properly positioned.
The water bottle cannot be securely locked.
Please re-do Page 19 step 5 and re-tighten the tapping screws (Part P1).
The right-side gripper doesn’t rotate smoothly.
Solution:
1.Make sure there was oil applied on C10 & C11. (Page 8, step16 & step18)
2.Make sure there was oil applied on B19 (Page 5, step 2)
The left-side gripper doesn’t rotate smoothly.
Solution:
1.Make sure there was oil applied on C2 & C4. (Page 9, step 22 & step 24)
2.Make sure there was oil applied on B15 (Page 6, step 9)
If there are issues with the air intake.
If the Blaster has been left unused for a period of time, there may be issues with the air intake. It is recommended to use a needle or a thumbtack to gently tap the air intake several times to ensure that the one-way valve is not stuck.
Why is the steering insensitive when changing the handlebar mode?
Please confirm whether the spring has been loosened during assembly or the C7 part has not been installed.
Why can't the tenon stick when changing the mode?
Please confirm whether your P7 spring has been loosened when assembling B8, A3, and A9.
DIDIKSchool2U
Need Help?
Get In Touch
17-11, Stellar Suites, Jalan Puteri 4/7, Bandar Puteri, 47100 Puchong, Selangor.
and then Add to Home Screen